For devices in packages other than DIL packages (e.g. PLCC or TSOP packages) adapters are required with appropriate device sockets and, if necessary, with auxiliary circuits.
The following modules and adapters are currently available from CONITEC:
Further adapters (not available from CONITEC):
Article Nr. |
Adapter |
DIL-42 Programming Adapter (e.g. M27C160) | |
Adapter 210866 with modification A | |
Adapter 210867 with modification A |
Old adapters from CONITEC:
Article Nr. |
Adapter |
Adapter for 32-pole PLCC-EPROMs | |
Adapter for 20/28-pole PLCC GALs | |
Adapter for 32-pole LCC-EPROMs | |
Adapter for 44-pole PLCC-EPROMs and MCUs |
Some
devices programmable with the GALEP require adapters which
unfortunately are not offered by CONITEC at this time.
However,
reading the reference material indicated below, with regard to the
adapters mentioned should enable you to build your own adapter:
|
Adapter |
PIC16C9XX Programming Adapter | |
PIC17C7xx Programming Adapter | |
S87C552 Programming Adapter |
Some devices can be handled by using Adapters of Emulation Technology:
|
Adapter |
Emulation Adapter AS-08-08-01ML-3 |
For the following devices the correct adapter can be ordered directly from the manufacturer:
|
Adapter |
HD6477034F, HD6477034VF Programming Adapter | |
HD64F3334Y, HD64F3337Y Programming Adapter |
See also Inserting an adapter into the GALEP