GALEP Module 80pin QFP 0.50 pitch, 12x12 mm
Push the top of the ZIF socket downwards until the contacts open. If possible, use a vacuum pick tool for inserting the device into the socket. If not otherwise mentioned, Pin 1 is located at the front edge of the socket. Release the top of the socket. If you use the converter for devices with less pins, place the device towards the bottom edge of the socket (away from Pin 1) so that the upper contacts stay unconnected.
Before programming, visually check the device orientation and the connection of device and socket. Incorrect insertion or unconnected pins can damage the device. Do not directly touch the pins of the device or the socket.
To take out the device, push the top of converter ZIF socket downwards until the contacts open, and use the pick tool for removing the device.
