Adapter for 20/28-pole PLCC GALs
The GAL Adapter
Base 1 Base 2
GAL Adapter
Art.-No. 210 824
The GAL adapter accepts the GAL 16V8 into the left base, and the GALs 20V8 and 22V10 into the right base. When inserting in the GALEP pay attention to the position of pin 1.
Allocation of Pins DIL connection of adapter on PLCC base
Base 1:
DIL24 |
20Pol PLCC |
3-12 |
1-10 |
13-22 |
11-20 |
Base 2:
DIL24 |
28Pol PLCC |
1-6 |
2-7 |
7-12 |
9-14 |
13-18 |
16-21 |
19-24 |
23-28 |
The Pins 1,8,15 and 22 are not connected on the PLCC base 2!
Before inserting the device into the adapter's base, be sure to check which of the two bases is the correct one to use.
See also Using adapters in Galep-4