S87C552 Programming Adapter
The Microcontrollers S87C552 from Philips can not be inserted directly into the Galep.
CONITEC does not offer a special adapter for these devices, but you can order a suitable one, the PA_87C52_87C552 ( for PLCC 68pin package ) from:
RECO MEDIZINTECHNIK WOLFGANG RENTSCH
Pillnitzer Straße 17, 01788 Pirna-Copitz / Sa / GERMANY (EU)
- contact person: Mr Rentsch
Alternatively, you can easily build your own adapter following these instructions.
To program the following devices, only the connections between the Galep-4 and the required device – as described in the following table, are necessary. The device can be programmed like the S87C52.
For the adapter you will need the following materials and proper tools:
Pin Name |
GALEP DIL40 |
PLCC 68pin |
PQFP 80pin |
P1.0 |
1 |
16 |
10 |
P1.1 |
2 |
17 |
11 |
P1.2 |
3 |
18 |
12 |
P1.3 |
4 |
19 |
13 |
P1.4 |
5 |
20 |
14 |
P1.5 |
6 |
21 |
15 |
P1.6 |
7 |
22 |
16 |
P1.7 |
8 |
23 |
17 |
RST |
9 |
15 |
9 |
P3.6 |
16 |
30 |
26 |
P3.7 |
17 |
31 |
27 |
XTAL2 |
18 |
34 |
31 |
XTAL1 |
19 |
35 |
32 |
Vss |
20 |
36,37,60 |
34,35,36,61 |
P2.0 |
21 |
39 |
38 |
P2.1 |
22 |
40 |
39 |
P2.2 |
23 |
41 |
40 |
P2.3 |
24 |
42 |
41 |
P2.4 |
25 |
43 |
42 |
P2.6 |
27 |
45 |
46 |
P2.7 |
28 |
46 |
47 |
PSEN |
29 |
47 |
48 |
ALE/PROG |
30 |
48 |
49 |
EA/Vpp |
31 |
49 |
50 |
P0.7 |
32 |
50 |
51 |
P0.6 |
33 |
51 |
52 |
P0.5 |
34 |
52 |
53 |
P0.4 |
35 |
53 |
54 |
P0.3 |
36 |
54 |
55 |
P0.2 |
37 |
55 |
56 |
P0.1 |
38 |
56 |
57 |
P0.0 |
39 |
57 |
58 |
Vdd |
40 |
2,61 |
63,72 |
* The pins not described above are open
PLEASE NOTE: The information given cannot be covered by a warranty. Please always check the position of the pins mentioned using the device's documentation. We can not offer any warranty covering damage to the Galep-4 or to the device caused by faulty wiring.